Square Feet To Marla Online — Free Square Feet To Marla Tool
CodexFuse Team · 2026-11-06T02:44:17.172Z · 9 min read min read
Convert square feet to marla free online. One marla is 272.25 sq ft — verify any plot listing in seconds before you negotiate.
Square feet to marla conversion turns a plot size listed in square feet into the marla figure Pakistani buyers, sellers and agents actually negotiate in. One marla equals 272.25 square feet, so you divide the square-foot figure by 272.25 — and the Square Feet to Marla converter does that division for you, along with the kanal, acre and square-yard equivalents, in one step.
That single number matters more than most people realise. In Lahore, Islamabad, Karachi and every smaller city, plots are advertised in marla and kanal while architects, builders and housing-society paperwork often quote square feet. A mismatch between the two is how buyers overpay, sellers underprice, and a straightforward deal turns into an argument at the registry office.
How many square feet are in one marla?
One marla is exactly 272.25 square feet. That is the standard figure used across Pakistan for residential plots, and it is the number every other conversion in this article is built on. One kanal is 20 marla, or 5,445 square feet; one acre is 160 marla, or 43,560 square feet; and one marla is 30.25 square yards.
The number is not always this tidy in practice. Older settlements and some rural areas historically used slightly different marla sizes, and a few local customs still quote a marla of around 225 or 250 square feet. Before money changes hands, confirm which marla your housing society or patwari uses — the 272.25 figure is the standard, but the document in front of you is the authority.
| Unit | Equals | In square feet |
|---|---|---|
| 1 marla | 30.25 sq yd | 272.25 sq ft |
| 1 kanal | 20 marla | 5,445 sq ft |
| 1 acre | 8 kanal / 160 marla | 43,560 sq ft |
| 1 sq yard | 9 sq ft | 9 sq ft |
| 1 marla | 25.29 sq m (approx.) | 272.25 sq ft |
How do you convert square feet to marla by hand?
Divide the square-foot figure by 272.25 and the result is the size in marla. A plot of 2,722.5 square feet is 10 marla; a plot of 5,445 square feet is 20 marla, which is exactly one kanal. If the division leaves a remainder, that remainder is a fraction of a marla — around 0.5 marla is roughly 136 square feet.
The hand method works, but it is exactly where mistakes creep in. People divide by 272 instead of 272.25, round too early, or confuse marla with square yards — and on a plot worth millions of rupees, a half-marla error is real money. That is the whole point of a converter: the arithmetic is trivial, the cost of getting it wrong is not.
Always convert first, then negotiate. Agreeing a per-marla price before you know the exact marla figure hands the other side the arithmetic — and the advantage.
Why does the marla figure matter when buying a plot?
Because the marla figure is what the price is built on. A plot advertised as "10 marla" at Rs 500,000 per marla costs Rs 5,000,000 — but if the plot actually measures 2,450 square feet, it is 9 marla, and the fair price at the same rate is Rs 4,500,000. Half a million rupees rides on a single division.
Three places where the wrong figure causes real damage:
- The listing itself: agents round up. A 9.4-marla plot becomes "10 marla" in the ad, and the buyer only discovers the gap at measurement time.
- The registry and transfer: the sale deed records the area. A figure that does not match the society's record can stall the transfer for weeks.
- Construction planning: covered-area rules, setbacks and the architect's drawings all start from the plot area. A wrong starting number means redrawn plans.
A worked example: buying an 8-marla plot in Lahore
Take a concrete case. A family is buying a residential plot in a Lahore housing society. The listing says "8 marla, prime location", and the asking price is Rs 450,000 per marla — Rs 3,600,000 in total. The society's allotment letter, however, lists the plot as 2,178 square feet. Is the listing honest?
They open the Square Feet to Marla converter and enter 2,178. The tool returns 8 marla, and the equivalents underneath confirm it: 0.4 kanal, 242 square yards, 0.05 acre. The listing checks out, and they proceed with confidence.
Now consider the version where it does not. Suppose the allotment letter had said 1,906 square feet instead. That is 7 marla, not 8 — and at Rs 450,000 per marla, the fair price is Rs 3,150,000, not Rs 3,600,000. The buyer who skips the conversion overpays by Rs 450,000 for land that does not exist. One minute with a converter is the cheapest insurance in the whole transaction.
The same check works in reverse. If you already know the marla figure and want the square-foot size — for an architect, a builder, or a bank valuation — the marla to square feet converter runs the calculation the other way.
A converter checks the arithmetic, not the land. It cannot confirm boundaries, ownership, or whether the society's record matches the ground. Always verify the physical measurement and the documents with the relevant authority before paying.
How to use the Square Feet to Marla tool
The tool keeps the whole job to three steps, exactly as its page describes them:
- Enter sq ft: type the plot size in square feet into the single input field.
- See marla: the marla figure appears instantly — no button to press, no page reload.
- Get equivalents: the same result shows the kanal, acre and square-yard equivalents alongside, so you can quote the size in whichever unit the other party uses.
It runs entirely in your browser, it is free with no usage limit, and there is no sign-up. The quick reference table on the page covers the common plot sizes, which is handy when you are comparing several listings at once and want the figures without typing each one in.
What if the plot is listed in kanal or acres?
Then convert from that unit instead of forcing everything through square feet. A kanal figure converts cleanly — multiply kanal by 20 for marla — and the kanal to marla converter handles that direction. For larger land, the kanal to square feet converter is the matching tool, and if you are comparing plots quoted in different units altogether, the area converter lines up acres, hectares and square feet side by side.
One practical rule: pick one unit for the whole negotiation and stick to it. Switching between marla and square feet mid-conversation is how rounding errors slip in unnoticed.
A wrong marla figure can cost you lakhs on a single deal. Use the free Square Feet to Marla converter to verify every listing in seconds — then keep your documents, valuations and records organised on CodexFuse, fully managed, on credits, with no subscriptions.
Get Started with CodexFuseWhat the converter does not do
Honest limits matter here, because land is high-stakes:
- It does not measure your plot: it converts a number you give it. If your square-foot figure came from a rough estimate, the marla figure inherits that error exactly.
- It does not know local marla variants: it uses the standard 272.25 square feet. If your area uses a different customary marla, confirm with the society or patwari first.
- It does not value land: it tells you the size, not what the size is worth. For price, use a recent comparable sale — or the property tax calculator to estimate the annual tax on the plot once you own it.
- It does not replace legal verification: area, title and possession are three different things, and only the documents and a physical survey settle them.
Converting the other way? Read Marla to Square Feet — Free Online Converter for the reverse calculation with the same worked-example approach.
Frequently Asked Questions
How many square feet are in 1 marla?
One marla equals 272.25 square feet. This is the standard figure used across Pakistan. Multiply the marla figure by 272.25 to get square feet, or divide square feet by 272.25 to get marla.
How do I convert square feet to marla?
Divide the square-foot figure by 272.25. For example, 2,722.5 square feet divided by 272.25 equals 10 marla. The free online converter does this instantly and also shows the kanal, acre and square-yard equivalents.
How many marla are in 1 kanal?
One kanal equals 20 marla, or 5,445 square feet. Half a kanal is 10 marla, and a quarter kanal is 5 marla — the three plot sizes most commonly listed in Pakistani housing societies.
Is the Square Feet to Marla tool free?
Yes. The tool is free with unlimited use, runs entirely in your browser, and needs no sign-up or account.
Why do listings use marla instead of square feet?
Marla and kanal are the traditional land units of Punjab and much of Pakistan, so buyers, sellers, agents and housing societies all quote prices per marla. Square feet appear mainly in architectural drawings and society allotment letters, which is why converting between the two is a daily need in any property deal.
Can the marla size differ by area?
Yes, in some older or rural areas a customary marla can differ from the standard 272.25 square feet. Always confirm the figure your housing society or local land record uses before finalising a price.
Verify the size, then buy with confidence
Converting square feet to marla takes ten seconds; recovering from a wrong figure takes weeks and can cost lakhs. Run every listing through the Square Feet to Marla converter before you negotiate, confirm the figure against the allotment letter and the society's record, and keep the verified number in front of you through the whole deal. And once the plot is yours, move the paperwork, records and follow-up to CodexFuse — your documents, email, hosting and backups managed in one place, on credits, with no subscriptions and no server babysitting. Get started with CodexFuse today and stop letting small numbers create big property problems.
