Linkedin Banner Size Guide Online — Free Linkedin Banner Size Guide Tool
CodexFuse Team · 2026-11-01T07:06:58.490Z · 8 min read min read
Check the exact LinkedIn banner size before you upload: dimensions, safe areas and a free guide tool that previews cropping on desktop and mobile.
A linkedin banner size guide gives you the exact pixel dimensions for a LinkedIn cover image, plus the safe area where text and logos stay visible after LinkedIn crops the image on different screens. Get the size wrong and a carefully designed banner turns blurry, stretched, or chopped at the edges.
This guide covers the dimensions that matter, the cropping traps most people miss, and a free LinkedIn banner size guide tool that checks your image before you upload it.
What Is the LinkedIn Banner Size?
The LinkedIn banner size for a personal profile is 1584 by 396 pixels, a wide 4:1 rectangle. LinkedIn displays that image differently on desktop and mobile, so the size is only half the story. The other half is the safe area: the central region that stays visible on every screen.
LinkedIn Banner Dimensions at a Glance
LinkedIn has several image surfaces, and mixing them up is the most common cause of a stretched or pixelated banner.
| Surface | Recommended size | Aspect ratio |
|---|---|---|
| Personal profile banner | 1584 × 396 pixels | 4:1 |
| Company page banner | 1128 × 191 pixels | About 5.9:1 |
| Profile photo | 400 × 400 pixels minimum | 1:1 |
| Feed post image | 1200 × 627 pixels | About 1.91:1 |
Start from an image at least as large as the recommended size. Upscaling a small image to 1584 pixels wide only makes its softness more visible, so pick a different photo rather than forcing a small one to fit.
Export as JPG or PNG at exactly 1584 × 396 pixels, so LinkedIn does not resize your image and what you preview matches what visitors see.
Why Do LinkedIn Banners Look Blurry or Cropped?
LinkedIn banners usually look blurry or cropped because the uploaded image was too small, the wrong aspect ratio, or designed with important content near the edges that gets cut off on smaller screens. LinkedIn resizes uploads to fit its display area, and any mismatch between your image and that area shows up as softness, stretching, or missing content.
Four problems explain almost every bad-looking banner:
- Too-small source image: an 800-pixel-wide graphic stretched to 1584 pixels will look soft.
- Wrong aspect ratio: a square image squeezed into a 4:1 banner distorts faces and text.
- Edge-placed text: headlines near the border get cropped on mobile.
- Profile photo overlap: on desktop, your round profile photo covers the banner's lower-left corner.
The fix is reliable: design at the exact size, keep the message central, and preview on desktop and mobile before you commit.
How to Use the Free LinkedIn Banner Size Guide Tool
The free linkedin banner size guide tool on CodexFuse covers six LinkedIn surfaces and walks you through the check in three steps. No design software needed.
- Pick a surface: choose the LinkedIn surface you are designing for, such as a personal profile banner or a company page banner.
- Check the dimensions: read the exact dimensions for that surface, so you design or export at the right size from the start.
- Test your image: use the safe-area visualizer to see which parts of your image stay visible and which parts risk being cropped.
The safe-area visualizer is the part most people skip and most need: a banner can be exactly 1584 × 396 pixels and still fail if its headline sits at the far edge and disappears on a narrower screen. Once the design clears the check, pair it with a matching LinkedIn banner maker workflow to build the finished graphic at the same size.
The tool page states that login is required to use it, even though use itself is free and unlimited. Factor in a minute to create a free account before you start, rather than discovering the sign-in step when you are ready to test an image.
Worked Example: A Brand Consultant Fixes Her Banner in One Pass
The following scenario is fictional, but every number in it is real. Maya is an independent brand consultant whose LinkedIn profile brings in most of her enquiries. Her old banner was a 1200 × 800 photograph with her tagline stretched across the bottom edge.
Here is what she did, step by step:
- Measured the problem: her image was 1200 pixels wide, short of the 1584-pixel target, and its 3:2 ratio did not match the 4:1 slot.
- Picked the surface: in the linkedin banner size guide tool she selected the personal profile banner: 1584 × 396 pixels.
- Rebuilt at exact size: she cropped a wider photograph to 1584 × 396, centred her tagline, and kept all text 120 pixels clear of each edge.
- Tested the safe area: her tagline survived the mobile crop, but her logo sat under the profile photo overlap, so she moved it centre-right.
- Exported and uploaded: she exported a JPG at 1584 × 396 pixels weighing 312 KB, uploaded it once, and checked it on desktop and phone.
The result was not a redesign: the same photograph and tagline, now placed where LinkedIn actually shows them. One pass, one upload, no trial-and-error versions.
Check your exact LinkedIn banner size and safe area with CodexFuse's free guide tool, then put your hosting, email, and security on the same fully managed platform — on credits, with no subscriptions to juggle.
Get Started with CodexFuseCommon Banner Mistakes That the Size Check Catches
- Tiny text in a wide banner: text that looks fine in a design file becomes unreadable in a 4:1 strip. Keep it to a few large words.
- One message, two crops: a banner designed only for desktop loses its edges on mobile. Design for the narrowest view first.
- Ignoring the photo overlap: treat the lower-left corner as off-limits for text and logos.
- Reusing a post image as a banner: a 1200 × 627 feed image does not fit a 1584 × 396 banner without heavy cropping. Design each surface at its own size, or use a banner maker for ad sizes and export one version per surface.
Once your banner is sized correctly, tighten the rest of the profile: an AI LinkedIn bio tool helps draft the headline and summary underneath it, a circle image cropper for round profile pictures keeps your photo from clashing with the banner, and an Instagram post maker applies the same sizing discipline to other channels.
What This Tool Does Not Do
A size guide is not a design studio. The tool gives you the right dimensions and safe area, but it does not design the banner, write your headline, or choose your photograph. For the finished graphic itself, use a design tool or banner maker after the size check.
It also cannot control LinkedIn layout changes, so re-check the size if your banner suddenly looks different after a platform update. And it cannot fix a low-quality source photo: a better source image beats a bigger export of a poor one.
From a Banner to a Managed Online Presence
A LinkedIn banner is usually one piece of a larger problem: a presence spread across separate subscriptions for hosting, email, design tools, and security, each with its own bill. That subscription chaos is what CodexFuse replaces with one fully managed platform on credits.
The workflow is concrete. First, move the website your LinkedIn profile links to onto CodexFuse hosting, so visitors land on a fast page you do not maintain yourself. Second, set up business email on the same platform, so enquiries arrive in a professional inbox. Third, let the platform handle security and backups instead of plugins you must remember to update. You pay with credits as you use services, with no subscription locking you in.
None of that requires becoming your own IT department: the platform handles maintenance while you handle the work your profile advertises.
Frequently Asked Questions
What is the LinkedIn banner size for a personal profile?
1584 × 396 pixels, a 4:1 rectangle. Design at exactly that size, keep text central, and preview on mobile before uploading, because LinkedIn crops the sides on narrower screens.
What is the LinkedIn company page banner size?
1128 × 191 pixels, a wider ratio than the personal profile banner. Do not reuse a personal banner for a company page without re-exporting it, or it will be cropped or stretched to fit.
Why does my LinkedIn banner look blurry?
Usually because the source image was smaller than 1584 pixels wide and LinkedIn stretched it to fill the slot. Start from an image at least 1584 pixels wide, export at the exact size, and avoid re-saving the same JPG repeatedly.
Where is the safe area on a LinkedIn banner?
The central region that stays visible on both desktop and mobile, clear of side crops and the profile photo overlap in the lower-left corner. Keep headlines and logos inside it, and confirm placement with the guide tool's safe-area visualizer before uploading.
Is the LinkedIn banner size guide tool free?
Yes, the free linkedin banner size guide tool offers unlimited use according to its own FAQ, but the tool page states that login is required, so you need a free account first. The check takes a few minutes and saves repeated uploads of banners that crop badly.
Should I use the same image for LinkedIn and other social profiles?
No. Each platform uses different dimensions and crops, so one image rarely fits everywhere. Export a separate version per surface at its exact size, and check each one before uploading.
